2026 Realistic NS0-164 Dumps Questions To Gain Brilliant Result
Start your NS0-164 Exam Questions Preparation with Updated 263 Questions
NEW QUESTION # 79
Which system is recommended as a secondary system for SnapVault?
- A. FAS with NearStore license
- B. IS1200
- C. NearStore VTL
- D. DataFort
Answer: A
NEW QUESTION # 80
You are troubleshooting a clustered failover problem at a customer site. The customer explains that both storage appliances were NFS mounted onto the Solaris host. You attempt to create a file on the NFS mount point for the inaccessible appliance, but you get the following error:NFS server filer2 not responding still trying.Symptoms:
1) When not in takeover mode, both storage appliances operate normally.
2) In takeover mode, the taken over node is not accessible on the network.You perform a "cf giveback" and you can now create a file over NFS on both appliances.
What should vou do first to resolve this issue?
- A. Replace the NIC adapter.
- B. Replace the cluster interconnect card and run diagnostics "all" to ensure proper system operation.
- C. Submit a new bug report.
- D. Use the cluster-config-checker.cgi to identify the problem and corrective action.
Answer: D
NEW QUESTION # 81
What is the format for snapvault schedule?
- A. List of dates in ISO Date format
- B. crontab format
- C. cnt[@day_list][@hour_list]
- D. YYYY-MM-DD
Answer: C
NEW QUESTION # 82
Refer to the exhibit.
A company has three servers that are using the iSCSI protocol to connect to a two node NetApp ONTAP cluster. The server administrator notices that half of the paths are down. The administrator checks the ONTAP cluster and notices the servers are logging into only the first controller.
Which two steps should the administrator take to troubleshoot the issue? (Choose two.)
- A. Verify that each server has been rebooted
- B. Verify that the controller has not been taken over
- C. Verify that the iSCSI data protocol has been enabled on the ports
- D. Verify that the LIFs are up
Answer: C,D
NEW QUESTION # 83
What are two destination targets for ONTAP S3? (Choose Two).
- A. SMB file shares.
- B. StorageGRID.
- C. Amazon FSx for NetApp ONTAP.
- D. block storage systems.
Answer: B,C
NEW QUESTION # 84
The required hardware to add SyncMirror to an existing Clustered Failover system consists of:
- A. Disk shelves, adapters and cabling
- B. Disk shelves and cabling
- C. Disk shelves and cluster interconnect
- D. Disk shelves and termination switches
Answer: A
NEW QUESTION # 85
Normally, before you split a SyncMirror volume, you ensure that both plexes are
- A. snapshots, contain the most recent snapshot
- B. plexes, pools
- C. offline, operational
- D. online, operational
Answer: D
NEW QUESTION # 86
You want to create an automated test environment that performs a single file SnapRestore. Every time you run the procedure, however, SnapRestore prompts you to confirm your decision to revert the file. How can you automate this step?
- A. Enter the priv set advanced mode on the storage appliance and the prompt will not appear.
- B. Enable the options snaprestore_noprompts enable=on option.
- C. These prompts are for data protection and auditing and cannot be overridden.
- D. Use the -f option with the snap restore command.
Answer: D
NEW QUESTION # 87
You are trying to do a single file SnapRestore for a file, but you are receiving an error message that the directory structure no longer exists.
Which one of the following is the most likely explanation?
- A. Once the directory structure has been deleted, you cannot restore the file using single file SnapRestore. You must now SnapRestore the volume.
- B. None of the above
- C. Snapshots have been created since the original directory structure was deleted.
- D. You must recreate the directory structure before trying to restore the file.
Answer: D
NEW QUESTION # 88
When Data ONTAP creates a weekly, nightly, or hourly snapshot, the value of n (as shown by the UNIX Is command) is adjusted for all the weekly, nightly, or hourly snapshots. The higher the value of n.
the_________the snapshot.
- A. least important
- B. older
- C. newer
- D. more important
Answer: B
NEW QUESTION # 89
Which command disables client access to Snapshot copies on a volume called flexvol1?
- A. vol options flexvol1 snapdir on
- B. snap access flexvol1 off
- C. cifs shares-change flexvol1 -nosnap
- D. vol options flexvol1 nosnapdir on
- E. vol options flexvol1 snapdir off
Answer: D
NEW QUESTION # 90
Match each term with the term's function. (HA pair, local tier, SVM, LIF)
- A. HA pair: Two nodes for redundancy. Local tier: Physical storage. SVM: Logical data server. LIF:
Network entry point. - B. HA pair: Logical data server. Local tier: Two nodes for redundancy. SVM: Physical storage. LIF:
Network entry point. - C. HA pair: Physical storage. Local tier: Network entry point. SVM: Two nodes for redundancy. LIF:
Logical data server. - D. HA pair: Network entry point.Local tier: Logical data server.SVM: Two nodes for redundancy. LIF:
Physical storage.
Answer: A
NEW QUESTION # 91
After an unexpected ONTAP node reboot, an administrator notices that the NAS data LIFs are not on their home port.
Which UF configuration would modify this behavior?
- A. -auto-revert
- B. -home-port
- C. -service-policy
- D. -failover-group
Answer: B
NEW QUESTION # 92
In ONTAP 9.12, what allows an S3 permission to read existing NFS files as objects?
- A. NFS export
- B. SMB share
- C. Security certificate
- D. User mapping
Answer: D
NEW QUESTION # 93
Alter issuing the vol split vol0/plex0 volNew command:
- A. There are two unmirrored volumes, vol0 and volNew.
- B. There is a new mirrored volume called volNew.
- C. There is a new plex called plexNew.
- D. There are two new plexes, plex0 and plexNew.
Answer: A
NEW QUESTION # 94
Which two options must be configured to use tamperproof snapshots? (Choose two.)
- A. Compliance clock
- B. SnapLock aggregate
- C. SnapLock license
- D. Multi Admin Verification
Answer: A,C
NEW QUESTION # 95
What is the default FabricPool tiering policy for a newly created volume?
- A. all
- B. auto
- C. none
- D. snapshot-only
Answer: D
NEW QUESTION # 96
An administrator has an ESXi cluster with VMware VMFS LUNs on an AFF system. Alter troubleshooting performance issues, the administrator determines that timeout best practices are not set on the hosts.
Which NetApp tool would apply the best practice settings?
- A. SnapCenter Plug-in for VMware vSphere
- B. SAN Host Utilities
- C. SnapManager
- D. ONTAP Tools for vSphere
Answer: D
NEW QUESTION # 97
Which OSSV package would you use to perform an OSSV unattended installation?
- A. None of the above
- B. svunattendossv
- C. svconfigpackager
- D. unattendpackager
Answer: C
NEW QUESTION # 98
Which two steps should an administrator take to create a two-node ONTAP Select cluster that spans two data centers and provide automated switchover without any data loss? (Choose two.)
- A. Use ONTAP Mediator service to make sure that a quorum exists for the two nodes
- B. Make sure that the ONTAP Select Deploy VM resides at a third location other than the two data centers
- C. Set up a SnapMirror Synchronous relationship in StrictSync mode to prevent any data loss in case of a failover
- D. Use ONTAP Select Deploy to install the nodes on the VMware environment
Answer: A,D
NEW QUESTION # 99
In a fabric-attached MetroCluster, a "site failure" is described as a __________.
- A. malfunction of the Fibre Channel adapter on the cluster node
- B. failure of the Inter-Switch-Links (ISL)
- C. failure of the interconnect cable
- D. complete failure of the primary controller and disk shelves
Answer: D
NEW QUESTION # 100
Which statement about FC and NVMe/FC SAN configurations is true?
- A. The single-node, single-fabric-attached configuration can be scaled nondisruptively to add more nodes.
- B. The multinode, single-fabric-attached configuration provides fault tolerance at the network level.
- C. The multinode, dual-fabric-attached configuration provides nondisruptive scalability, as well as storage- level and network-level fault tolerance.
- D. FC SAN supports a direct-attached configuration.
Answer: C
NEW QUESTION # 101
In which two tools can an administrator identify security vulnerabilities and receive actionable intelligence?
(Choose two.)
- A. Active IQ Digital Advisor
- B. NetApp Harvest 2.0
- C. ONTAP System Manager
- D. BlueXP Classification
Answer: A,D
NEW QUESTION # 102
Which Data ONTAP option would you enable to set system wide throttling for all transfers?
- A. options transfer.wide.enable
- B. options transfer.throttle.enable
- C. options replication.wide.enable
- D. options replication.throttle.enable
Answer: D
NEW QUESTION # 103
Which layer in the TCP/IP model identifies the network protocol type of the packet?
- A. transport.
- B. internet.
- C. application.
- D. data link.
Answer: B
NEW QUESTION # 104
......
Easy Success Network Appliance NS0-164 Exam in First Try: https://pass4sure.validdumps.top/NS0-164-exam-torrent.html